ABB-Power-Conversion
ABB-Power-Conversion NSR050A0X432Z DC-DC converter
MPN: NSR050A0X432Z

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
ABB-Power-Conversion NSR050A0X432Z is a DC-DC converter from the Naos Raptor series. The specified input voltage range is 5V to 14V. The output voltage is 0.6 ~ 2V. The listed power rating is 100 W. The maximum output current is listed as 50A. The listed efficiency is 87.1%. The operating temperature range is 0°C ~ 70°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 1.45" L x 0.79" W x 1.10" H (36.8mm x 20.1mm x 27.9mm); Package / Case: 10-SIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, UVLO; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active High |
| Current - Output (Max) | 50 A |
| Efficiency | 87.1 % |
| Features | Remote On/Off, OCP, OTP, UVLO |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | 0 °C ~ 70 °C |
| Package | Tray |
| Package / Case | 10-SIP Module |
| Power (Watts) | 100 W |
| Series | Naos Raptor |
| Size / Dimension | 1.45" L x 0.79" W x 1.10" H (36.8 mm x 20.1 mm x 27.9 mm) |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 14 V |
| Voltage - Input (Min) | 5 V |
| Voltage - Output 1 | 0.6 ~ 2 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.