TDK-Lambda
TDK-Lambda PH150A28015 DC-DC converter
MPN: PH150A28015

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
TDK-Lambda PH150A28015 is a DC-DC converter from the PH-A280 series. The specified input voltage range is 200V to 425V. The output voltage is 15V. The listed power rating is 150W. The maximum output current is listed as 10A. The listed efficiency is 90%. The specified isolation voltage is 3kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.30" L x 1.46" W x 0.50" H (58.3mm x 37.2mm x 12.7mm); Packaging: Bulk; Package / Case: 8-DIP Module, 1/4 Brick; Other Names: 285-2409 PH150A280-15; Number of Outputs: 1; Features: Remote On/Off, OCP, OVP; Detailed Description: Isolated Module DC DC Converter 1 Output 15V 10A 200V - 425V Input; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Current - Output (Max) | 10 A |
| Detailed Description | Isolated Module DC DC Converter 1 Output 15 V 10 A 200 V - 425 V Input |
| Efficiency | 90 % |
| Features | Remote On/Off, OCP, OVP |
| Manufacturer | TDK-Lambda, Inc. |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C |
| Other Names | 285-2409 PH150 A280-15 |
| Package / Case | 8-DIP Module, 1/4 Brick |
| Packaging | Bulk |
| Power (Watts) | 150 W |
| Series | PH-A280 |
| Size / Dimension | 2.30" L x 1.46" W x 0.50" H (58.3 mm x 37.2 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 425 V |
| Voltage - Input (Min) | 200 V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 15 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.