TDK-Lambda
TDK-Lambda PH600S280-12 DC-DC converter
MPN: PH600S280-12

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
TDK-Lambda PH600S280-12 is a DC-DC converter from the PH-S (600W) series. The specified input voltage range is 200V to 400V. The output voltage is 12V. The listed power rating is 600 W. The maximum output current is listed as 50A. The specified isolation voltage is 3 kV. The operating temperature range is -20°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 3.85" L x 1.61" W x 0.50" H (86.0mm x 41.0mm x 12.7mm); Package / Case: Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 50 A |
| Features | Remote On/Off, OCP, OTP, OVP |
| Manufacturer | TDK-Lambda, Inc. |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -20 °C ~ 85 °C |
| Package | Bulk |
| Package / Case | Module |
| Power (Watts) | 600 W |
| Series | PH-S (600 W) |
| Size / Dimension | 3.85" L x 1.61" W x 0.50" H (86.0 mm x 41.0 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 400 V |
| Voltage - Input (Min) | 200 V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 12 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.