Flex-Power-Modules
Flex-Power-Modules PKE5325PI DC-DC converter
MPN: PKE5325PI

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Flex-Power-Modules PKE5325PI is a DC-DC converter from the PKE5x2x series. The specified input voltage range is 18V to 75V. The output voltage is 15V. The listed power rating is 30 W. The maximum output current is listed as 1A, 1A. The listed efficiency is 90%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 115°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -15V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.00" L x 1.00" W x 0.43" H (25.4mm x 25.4mm x 10.8mm); Package / Case: 6-DIP Module; Number of Outputs: 2; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active High; Approval Agency: cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | cURus |
| Control Features | Enable, Active High |
| Current - Output (Max) | 1 A, 1 A |
| Efficiency | 90 % |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 2 |
| Operating Temperature | -40 °C ~ 115 °C (With Derating) |
| Package | Tray |
| Package / Case | 6-DIP Module |
| Power (Watts) | 30 W |
| Series | PKE5x2x |
| Size / Dimension | 1.00" L x 1.00" W x 0.43" H (25.4 mm x 25.4 mm x 10.8 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 18 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 15 V |
| Voltage - Output 2 | -15 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.