Flex-Power-Modules
Flex-Power-Modules PKM2811EPI DC-DC converter
MPN: PKM2811EPI

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Flex-Power-Modules PKM2811EPI is a DC-DC converter from the PKM 2000E (82.5W) series. The specified input voltage range is 18V to 36V. The output voltage is 5V. The listed power rating is 83 W. The maximum output current is listed as 16.5A. The listed efficiency is 91.8%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.28" L x 1.45" W x 0.33" H (57.9mm x 36.8mm x 8.5mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKM281 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 16.5 A |
| Efficiency | 91.8 % |
| Features | Adjustable Output, Remote On/Off, Remote Sense |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 125 °C (With Derating) |
| Package | Tray |
| Package / Case | Quarter Brick |
| Power (Watts) | 83 W |
| Series | PKM 2000E (82.5 W) |
| Size / Dimension | 2.28" L x 1.45" W x 0.33" H (57.9 mm x 36.8 mm x 8.5 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 36 V |
| Voltage - Input (Min) | 18 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 5 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.