Flex-Power-Modules

Flex-Power-Modules PKM7513WPI DC-DC converter

MPN: PKM7513WPI

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules PKM7513WPI is a DC-DC converter from the PKM 7500W (50W) series. The specified input voltage range is 12V to 160V. The output voltage is 12V. The listed power rating is 50 W. The maximum output current is listed as 4.2A. The listed efficiency is 88.5%. The specified isolation voltage is 4 kV. The operating temperature range is -40°C ~ 110°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.28" L x 1.45" W x 0.50" H (57.9mm x 36.8mm x 12.7mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Baseplate, Heat Sink, Remote On/Off, Remote Sense; Control Features: Enable, Active High; Approval Agency: cURus, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencycURus, UL
Control FeaturesEnable, Active High
Current - Output (Max)4.2 A
Efficiency88.5 %
FeaturesBaseplate, Heat Sink, Remote On/Off, Remote Sense
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)1 (Unlimited)
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 110 °C (With Derating)
PackageTray
Package / CaseQuarter Brick
Power (Watts)50 W
SeriesPKM 7500 W (50 W)
Size / Dimension2.28" L x 1.45" W x 0.50" H (57.9 mm x 36.8 mm x 12.7 mm)
Standard Number62368-1
TypeIsolated Module
Voltage - Input (Max)160 V
Voltage - Input (Min)12 V
Voltage - Isolation4 kV
Voltage - Output 112 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.