Flex-Power-Modules
Flex-Power-Modules PME8318LSR-B DC-DC converter
MPN: PME8318LSR-B

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Flex-Power-Modules PME8318LSR-B is a DC-DC converter from the PME 8000 (33W) series. The specified input voltage range is 10.8V to 13.2V. The output voltage is 1.2 ~ 5.5V. The listed power rating is 11 W. The maximum output current is listed as 6A. The listed efficiency is 88.1%. The operating temperature range is -40°C ~ 85°C (With Derating). The mounting configuration is Surface Mount. Additional technical characteristics: Type: Non-Isolated PoL Module; Standard Number: 62368-1; Size / Dimension: 0.87" L x 0.49" W x 0.34" H (22.1mm x 12.6mm x 8.5mm); Package / Case: 6-SMD Module; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PME831 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 6 A |
| Efficiency | 88.1 % |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C (With Derating) |
| Package | Tray |
| Package / Case | 6-SMD Module |
| Power (Watts) | 11 W |
| Series | PME 8000 (33 W) |
| Size / Dimension | 0.87" L x 0.49" W x 0.34" H (22.1 mm x 12.6 mm x 8.5 mm) |
| Standard Number | 62368-1 |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 13.2 V |
| Voltage - Input (Min) | 10.8 V |
| Voltage - Output 1 | 1.2 ~ 5.5 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.