Flex-Power-Modules
Flex-Power-Modules PMG8218TP DC-DC converter
MPN: PMG8218TP

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Flex-Power-Modules PMG8218TP is a DC-DC converter from the PMG 8000 (66W) series. The specified input voltage range is 10.8V to 13.2V. The output voltage is 0.8V. The listed power rating is 9.6 W. The maximum output current is listed as 12A. The listed efficiency is 89.3%. The operating temperature range is -40°C ~ 85°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Standard Number: 62368-1; Size / Dimension: 1.37" L x 0.62" W x 0.35" H (34.8mm x 15.8mm x 9.0mm); Package / Case: 10-DIP Module; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 12 A |
| Efficiency | 89.3 % |
| Features | Adjustable Output, Remote On/Off, Remote Sense |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C (With Derating) |
| Package | Tray |
| Package / Case | 10-DIP Module |
| Power (Watts) | 9.6 W |
| Series | PMG 8000 (66 W) |
| Size / Dimension | 1.37" L x 0.62" W x 0.35" H (34.8 mm x 15.8 mm x 9.0 mm) |
| Standard Number | 62368-1 |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 13.2 V |
| Voltage - Input (Min) | 10.8 V |
| Voltage - Output 1 | 0.8 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.