Flex-Power-Modules

Flex-Power-Modules PMJ4718TP DC-DC converter

MPN: PMJ4718TP

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules PMJ4718TP is a DC-DC converter from the PMJ 4000 (75W) series. The specified input voltage range is 2.95V to 3.65V. The output voltage is 0.8 ~ 2.5V. The listed power rating is 75 W. The maximum output current is listed as 30A. The listed efficiency is 94.5%. The operating temperature range is -40°C ~ 85°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Standard Number: 62368-1; Size / Dimension: 1.37" L x 1.12" W x 0.35" H (34.8mm x 28.5mm x 9.0mm); Package / Case: 13-DIP Module; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencyCB, CSA, IEC, TUV, UL
Base Product NumberPMJ471
Control FeaturesEnable, Active Low
Current - Output (Max)30 A
Efficiency94.5 %
FeaturesAdjustable Output, Remote On/Off, Remote Sense
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 85 °C (With Derating)
PackageTray
Package / Case13-DIP Module
Power (Watts)75 W
SeriesPMJ 4000 (75 W)
Size / Dimension1.37" L x 1.12" W x 0.35" H (34.8 mm x 28.5 mm x 9.0 mm)
Standard Number62368-1
TypeNon-Isolated PoL Module
Voltage - Input (Max)3.65 V
Voltage - Input (Min)2.95 V
Voltage - Output 10.8 ~ 2.5 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.