Flex-Power-Modules

Flex-Power-Modules PMP5818UWP DC-DC converter

MPN: PMP5818UWP

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules PMP5818UWP is a DC-DC converter from the PMP 5000 (88W) series. The specified input voltage range is 4.5V to 14V. The output voltage is 0.7 ~ 5.5V. The listed power rating is 88 W. The maximum output current is listed as 16A. The listed efficiency is 92.8%. The operating temperature range is -40°C ~ 85°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Standard Number: 62368-1; Size / Dimension: 0.87" L x 0.75" W x 0.33" H (22.1mm x 18.9mm x 8.5mm); Package / Case: 11-DIP Module; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencyCB, CSA, IEC, TUV, UL
Base Product NumberPMP581
Control FeaturesEnable, Active Low
Current - Output (Max)16 A
Efficiency92.8 %
FeaturesAdjustable Output, Remote On/Off, Remote Sense
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 85 °C (With Derating)
PackageTray
Package / Case11-DIP Module
Power (Watts)88 W
SeriesPMP 5000 (88 W)
Size / Dimension0.87" L x 0.75" W x 0.33" H (22.1 mm x 18.9 mm x 8.5 mm)
Standard Number62368-1
TypeNon-Isolated PoL Module
Voltage - Input (Max)14 V
Voltage - Input (Min)4.5 V
Voltage - Output 10.7 ~ 5.5 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.