Artesyn-Embedded-Power

Artesyn-Embedded-Power PTH12040WAD DC-DC converter

MPN: PTH12040WAD

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Artesyn-Embedded-Power PTH12040WAD is a DC-DC converter from the PTH12040 (275W) series. The specified input voltage range is 8V to 14V. The output voltage is 0.8 ~ 5.5V. The listed power rating is 275 W. The maximum output current is listed as 50A. The listed efficiency is 96%. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.05' L x 1.05' W x 0.36' H (52.0mm x 26.6mm x 9.0mm); Package / Case: 20-DIP Module; Number of Outputs: 1; Features: Remote On/Off, OTP, SCP, UVLO; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Base Product NumberPTH12040
Current - Output (Max)50 A
Efficiency96 %
FeaturesRemote On/Off, OTP, SCP, UVLO
ManufacturerArtesyn Embedded Power
Moisture Sensitivity Level (MSL)3 (168 Hours)
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 85 °C
PackageTray
Package / Case20-DIP Module
Power (Watts)275 W
SeriesPTH12040 (275 W)
Size / Dimension2.05' L x 1.05' W x 0.36' H (52.0 mm x 26.6 mm x 9.0 mm)
TypeNon-Isolated PoL Module
Voltage - Input (Max)14 V
Voltage - Input (Min)8 V
Voltage - Output 10.8 ~ 5.5 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.