P-DUKE-Technology,Inc

P-DUKE-Technology,Inc QAE150-110S24W DC-DC converter

MPN: QAE150-110S24W

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

P-DUKE-Technology,Inc QAE150-110S24W is a DC-DC converter from the QAE150W (132W) series. The specified input voltage range is 40V to 160V. The output voltage is 24V. The listed power rating is 132 W. The maximum output current is listed as 5.5A. The listed efficiency is 89%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.28" L x 1.45" W x 0.50" H (57.9mm x 36.8mm x 12.7mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Remote On/Off, Remote Sense, Standby Output; Control Features: Enable, Active Low; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencyCB, CE, cURus
Base Product NumberQAE150
Control FeaturesEnable, Active Low
Current - Output (Max)5.5 A
Efficiency89 %
FeaturesAdjustable Output, Baseplate, Remote On/Off, Remote Sense, Standby Output
ManufacturerP-DUKE Technology, Inc.
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 105 °C (With Derating)
PackageBox
Package / CaseQuarter Brick
Power (Watts)132 W
SeriesQAE150 W (132 W)
Size / Dimension2.28" L x 1.45" W x 0.50" H (57.9 mm x 36.8 mm x 12.7 mm)
Standard Number62368-1
TypeIsolated Module
Voltage - Input (Max)160 V
Voltage - Input (Min)40 V
Voltage - Isolation3 kV
Voltage - Output 124 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.