Bel-Power-Solutions
Bel-Power-Solutions QHS40ZE-NTA1 DC-DC converter
MPN: QHS40ZE-NTA1

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Bel-Power-Solutions QHS40ZE-NTA1 is a DC-DC converter from the QHS series. The specified input voltage range is 36V to 75V. The output voltage is 3.3V. The listed power rating is 132 W. The maximum output current is listed as 40A. The listed efficiency is 89%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.28" L x 1.45" W x 0.50" H (57.9mm x 36.8mm x 12.7mm); Package / Case: 8-DIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 40 A |
| Efficiency | 89 % |
| Features | Remote On/Off, OCP, OTP, OVP |
| Manufacturer | Bel Power Solutions |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 100 °C |
| Package | Bulk |
| Package / Case | 8-DIP Module |
| Power (Watts) | 132 W |
| Series | QHS |
| Size / Dimension | 2.28" L x 1.45" W x 0.50" H (57.9 mm x 36.8 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 3.3 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.