XP-Power
XP-Power RDC3072T0512 DC-DC converter
MPN: RDC3072T0512

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
XP-Power RDC3072T0512 is a DC-DC converter from the RDC (30W) series. The specified input voltage range is 36V to 140V. The output voltage is 5V. The listed power rating is 30 W. The maximum output current is listed as 4A, 420mA, 420mA. The listed efficiency is 90%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 75°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 3: -12V; Voltage - Output 2: 12V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm); Package / Case: 7-DIP Module; Number of Outputs: 3; Features: Remote On/Off, OCP, OVP, SCP, UVLO; Control Features: Enable, Active High; Applications: Railway. These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | Railway |
|---|---|
| Base Product Number | RDC3072 |
| Control Features | Enable, Active High |
| Current - Output (Max) | 4 A, 420 mA, 420 mA |
| Efficiency | 90 % |
| Features | Remote On/Off, OCP, OVP, SCP, UVLO |
| Manufacturer | XP Power |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 3 |
| Operating Temperature | -40 °C ~ 75 °C |
| Package | Tube |
| Package / Case | 7-DIP Module |
| Power (Watts) | 30 W |
| Series | RDC (30 W) |
| Size / Dimension | 2.00" L x 1.00" W x 0.40" H (50.8 mm x 25.4 mm x 10.2 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 140 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 5 V |
| Voltage - Output 2 | 12 V |
| Voltage - Output 3 | -12 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.