RECOM-Power
RECOM-Power RP40-120515TG DC-DC converter
MPN: RP40-120515TG

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
RECOM-Power RP40-120515TG is a DC-DC converter from the POWERLINE RP40-G (40W) series. The specified input voltage range is 9V to 18V. The output voltage is 5V. The listed power rating is 40 W. The maximum output current is listed as 6A, 300mA, 300mA. The listed efficiency is 86%. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 3: -15V; Voltage - Output 2: 15V; Type: Isolated Module; Size / Dimension: 2.00' L x 2.00' W x 0.40' H (50.8mm x 50.8mm x 10.2mm); Package / Case: 9-DIP Module; Number of Outputs: 3; Features: Remote On/Off, OCP, OVP, SCP, UVLO; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Base Product Number | RP40-120515 |
| Control Features | Enable, Active High |
| Current - Output (Max) | 6 A, 300 mA, 300 mA |
| Efficiency | 86 % |
| Features | Remote On/Off, OCP, OVP, SCP, UVLO |
| Manufacturer | RECOM Power |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 3 |
| Operating Temperature | -40 °C ~ 85 °C |
| Package | Tube |
| Package / Case | 9-DIP Module |
| Power (Watts) | 40 W |
| Series | POWERLINE RP40-G (40 W) |
| Size / Dimension | 2.00' L x 2.00' W x 0.40' H (50.8 mm x 50.8 mm x 10.2 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 18 V |
| Voltage - Input (Min) | 9 V |
| Voltage - Isolation | 1.6 kV |
| Voltage - Output 1 | 5 V |
| Voltage - Output 2 | 15 V |
| Voltage - Output 3 | -15 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.