ABB-Power-Conversion
ABB-Power-Conversion SE014S110 DC-DC converter
MPN: SE014S110

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
ABB-Power-Conversion SE014S110 is a DC-DC converter from the SE (14W) series. The specified input voltage range is 40V to 60V. The output voltage is 110V. The listed power rating is 14 W. The maximum output current is listed as 130mA. The listed efficiency is 82%. The specified isolation voltage is 500 V. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.00" L x 2.00" W x 0.50" H (50.8mm x 50.8mm x 12.7mm); Package / Case: 6-DIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OVP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 130 mA |
| Efficiency | 82 % |
| Features | Remote On/Off, OCP, OVP |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C |
| Package | Bulk |
| Package / Case | 6-DIP Module |
| Power (Watts) | 14 W |
| Series | SE (14 W) |
| Size / Dimension | 2.00" L x 2.00" W x 0.50" H (50.8 mm x 50.8 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 60 V |
| Voltage - Input (Min) | 40 V |
| Voltage - Isolation | 500 V |
| Voltage - Output 1 | 110 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.