Artesyn-Embedded-Power

Artesyn-Embedded-Power SIL30C-12SADJ-H DC-DC converter

MPN: SIL30C-12SADJ-H

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Artesyn-Embedded-Power SIL30C-12SADJ-H is a DC-DC converter from the SIL30C (150W) series. The specified input voltage range is 10.2V to 13.8V. The output voltage is 0.9 ~ 5V. The listed power rating is 150 W. The maximum output current is listed as 30A. The listed efficiency is 91%. The operating temperature range is 0°C ~ 80°C. The mounting configuration is Through Hole, Right Angle. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.40" L x 1.35" W x 0.47" H (61.0mm x 34.3mm x 11.9mm); Package / Case: 24-SIP Module, 23 Leads; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, SCP; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Current - Output (Max)30 A
Efficiency91 %
FeaturesRemote On/Off, OCP, OTP, SCP
ManufacturerArtesyn Embedded Power
Moisture Sensitivity Level (MSL)1 (Unlimited)
Mounting TypeThrough Hole, Right Angle
Number of Outputs1
Operating Temperature0 °C ~ 80 °C
PackageBulk
Package / Case24-SIP Module, 23 Leads
Power (Watts)150 W
SeriesSIL30C (150 W)
Size / Dimension2.40" L x 1.35" W x 0.47" H (61.0 mm x 34.3 mm x 11.9 mm)
TypeNon-Isolated PoL Module
Voltage - Input (Max)13.8 V
Voltage - Input (Min)10.2 V
Voltage - Output 10.9 ~ 5 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.