Artesyn-Embedded-Power

Artesyn-Embedded-Power SIL80C2-00SADJ-HJ DC-DC converter

MPN: SIL80C2-00SADJ-HJ

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Artesyn-Embedded-Power SIL80C2-00SADJ-HJ is a DC-DC converter from the SIL80C2 (400W) series. The specified input voltage range is 4.7V to 13.8V. The output voltage is 0.8375 ~ 5.1V. The listed power rating is 400 W. The maximum output current is listed as 80A. The listed efficiency is 88%. The operating temperature range is 0°C ~ 85°C. The mounting configuration is Through Hole, Right Angle. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.40" L x 1.25" W x 0.71" H (61.0mm x 31.8mm x 18.0mm); Package / Case: 26-SIP Module, 23 Leads; Number of Outputs: 1; Features: Remote On/Off, OTP, OVP, SCP; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Current - Output (Max)80 A
Efficiency88 %
FeaturesRemote On/Off, OTP, OVP, SCP
ManufacturerArtesyn Embedded Power
Moisture Sensitivity Level (MSL)1 (Unlimited)
Mounting TypeThrough Hole, Right Angle
Number of Outputs1
Operating Temperature0 °C ~ 85 °C
PackageTray
Package / Case26-SIP Module, 23 Leads
Power (Watts)400 W
SeriesSIL80C2 (400 W)
Size / Dimension2.40" L x 1.25" W x 0.71" H (61.0 mm x 31.8 mm x 18.0 mm)
TypeNon-Isolated PoL Module
Voltage - Input (Max)13.8 V
Voltage - Input (Min)4.7 V
Voltage - Output 10.8375 ~ 5.1 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.