Bel-Power-Solutions
Bel-Power-Solutions SIP301.5LT DC-DC converter
MPN: SIP301.5LT

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Bel-Power-Solutions SIP301.5LT is a DC-DC converter from the SIP300 (20W) series. The specified input voltage range is 3V to 3.6V. The output voltage is 1.5V. The listed power rating is 9 W. The maximum output current is listed as 6A. The listed efficiency is 79%. The operating temperature range is -25°C ~ 65°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.50' L x 0.25' W x 0.55' H (63.5mm x 6.4mm x 14.0mm); Package / Case: 11-SIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, SCP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 6 A |
| Efficiency | 79 % |
| Features | Remote On/Off, OCP, SCP |
| Manufacturer | Bel Power Solutions |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -25 °C ~ 65 °C |
| Package | Bulk |
| Package / Case | 11-SIP Module |
| Power (Watts) | 9 W |
| Series | SIP300 (20 W) |
| Size / Dimension | 2.50' L x 0.25' W x 0.55' H (63.5 mm x 6.4 mm x 14.0 mm) |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 3.6 V |
| Voltage - Input (Min) | 3 V |
| Voltage - Output 1 | 1.5 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.