Bel-Power-Solutions
Bel-Power-Solutions SIP301.8LT DC-DC converter
MPN: SIP301.8LT

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Bel-Power-Solutions SIP301.8LT is a DC-DC converter from the SIP300 (20W) series. The specified input voltage range is 3V to 3.6V. The output voltage is 1.8V. The listed power rating is 11 W. The maximum output current is listed as 6A. The listed efficiency is 82%. The operating temperature range is -25°C ~ 65°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.50" L x 0.25" W x 0.55" H (63.5mm x 6.4mm x 14.0mm); Package / Case: 11-SIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, SCP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 6 A |
| Efficiency | 82 % |
| Features | Remote On/Off, OCP, SCP |
| Manufacturer | Bel Power Solutions |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -25 °C ~ 65 °C |
| Package | Bulk |
| Package / Case | 11-SIP Module |
| Power (Watts) | 11 W |
| Series | SIP300 (20 W) |
| Size / Dimension | 2.50" L x 0.25" W x 0.55" H (63.5 mm x 6.4 mm x 14.0 mm) |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 3.6 V |
| Voltage - Input (Min) | 3 V |
| Voltage - Output 1 | 1.8 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.