XP-Power
XP-Power SIP90 DC-DC converter
MPN: SIP90

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
XP-Power SIP90 is a DC-DC converter from the XP EMCO - SIP (1W) series. The specified input voltage range is 3V to 6.7V. The output voltage is 25 ~ 90V. The listed power rating is 100 mW. The maximum output current is listed as 1mA. The operating temperature range is -20°C ~ 70°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: High Voltage - Non-Isolated Module; Size / Dimension: 1.15" L x 0.16" W x 0.55" H (29.2mm x 4.1mm x 14.0mm); Package / Case: 5-SIP Module; Number of Outputs: 1; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Current - Output (Max) | 1 mA |
| Manufacturer | XP Power |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -20 °C ~ 70 °C |
| Package | Bulk |
| Package / Case | 5-SIP Module |
| Power (Watts) | 100 mW |
| Series | XP EMCO - SIP (1 W) |
| Size / Dimension | 1.15" L x 0.16" W x 0.55" H (29.2 mm x 4.1 mm x 14.0 mm) |
| Type | High Voltage - Non-Isolated Module |
| Voltage - Input (Max) | 6.7 V |
| Voltage - Input (Min) | 3 V |
| Voltage - Output 1 | 25 ~ 90 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.