TRACO-Power

TRACO-Power TEN 40-1232 DC-DC converter

MPN: TEN 40-1232

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

TRACO-Power TEN 40-1232 is a DC-DC converter from the TEN 40 series. The specified input voltage range is 9V to 18V. The output voltage is 5V. The listed power rating is 39W. The maximum output current is listed as 6A, 300mA, 300mA. The listed efficiency is 86%. The specified isolation voltage is 1.5kV. The operating temperature range is -40°C ~ 75°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 3: -15V; Voltage - Output 2: 15V; Type: Isolated Module; Size / Dimension: 2.00" L x 2.00" W x 0.40" H (50.8mm x 50.8mm x 10.2mm); Package / Case: 9-DIP Module; Other Names: TEN 40-1232-ND TEN40-1232; Number of Outputs: 3; Features: Remote On/Off, OCP, OTP, OVP, SCP, UVLO; Detailed Description: Isolated Module DC DC Converter 3 Output 5V 15V -15V 6A, 300mA, 300mA 9V - 18V Input; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Current - Output (Max)6 A, 300 mA, 300 mA
Detailed DescriptionIsolated Module DC DC Converter 3 Output 5 V 15 V -15 V 6 A, 300 mA, 300 mA 9 V - 18 V Input
Efficiency86 %
FeaturesRemote On/Off, OCP, OTP, OVP, SCP, UVLO
ManufacturerTRACO Power
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs3
Operating Temperature-40 °C ~ 75 °C
Other NamesTEN 40-1232-ND TEN40-1232
Package / Case9-DIP Module
Power (Watts)39 W
SeriesTEN 40
Size / Dimension2.00" L x 2.00" W x 0.40" H (50.8 mm x 50.8 mm x 10.2 mm)
TypeIsolated Module
Voltage - Input (Max)18 V
Voltage - Input (Min)9 V
Voltage - Isolation1.5 kV
Voltage - Output 15 V
Voltage - Output 215 V
Voltage - Output 3-15 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.