TRACO-Power
TRACO-Power TEP 75-2410WI DC-DC converter
MPN: TEP 75-2410WI

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
TRACO-Power TEP 75-2410WI is a DC-DC converter from the TEP 75WI (75W) series. The specified input voltage range is 9V to 36V. The output voltage is 3.3V. The listed power rating is 66 W. The maximum output current is listed as 20A. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 75°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm); Package / Case: Half Brick; Number of Outputs: 1; Features: Remote On/Off, OTP, OVP, SCP, UVLO; Applications: ITE (Commercial), Railway. These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial), Railway |
|---|---|
| Base Product Number | TEP 75 |
| Current - Output (Max) | 20 A |
| Features | Remote On/Off, OTP, OVP, SCP, UVLO |
| Manufacturer | TRACO Power |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 75 °C (With Derating) |
| Package | Box |
| Package / Case | Half Brick |
| Power (Watts) | 66 W |
| Series | TEP 75WI (75 W) |
| Size / Dimension | 2.40" L x 2.28" W x 0.50" H (61.0 mm x 57.9 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 36 V |
| Voltage - Input (Min) | 9 V |
| Voltage - Isolation | 2.25 kV |
| Voltage - Output 1 | 3.3 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.