Flex-Power-Modules

Flex-Power-Modules BMR4912511-858 DC-DC converter

MPN: BMR4912511-858

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules BMR4912511-858 is a DC-DC converter from the BMR491 (1300W) series. The specified input voltage range is 40V to 60V. The output voltage is 12.2V. The listed power rating is 1.342 kW. The maximum output current is listed as 110A. The listed efficiency is 97%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 125°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 60950-1; 62368-1; Size / Dimension: 2.30" L x 1.45" W x 0.55" H (58.4mm x 36.8mm x 14.0mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Heat Sink, I²C Interface, PMBus™, Remote On/Off, Standby Output; Control Features: Enable, Active Low; Approval Agency: cURus, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencycURus, UL
Control FeaturesEnable, Active Low
Current - Output (Max)110 A
Efficiency97 %
FeaturesAdjustable Output, Baseplate, Heat Sink, I²C Interface, PMBus™, Remote On/Off, Standby Output
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)1 (Unlimited)
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 125 °C
PackageTray
Package / CaseQuarter Brick
Power (Watts)1.342 kW
SeriesBMR491 (1300 W)
Size / Dimension2.30" L x 1.45" W x 0.55" H (58.4 mm x 36.8 mm x 14.0 mm)
Standard Number60950-1; 62368-1
TypeIsolated Module
Voltage - Input (Max)60 V
Voltage - Input (Min)40 V
Voltage - Isolation1.5 kV
Voltage - Output 112.2 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.