Flex-Power-Modules

Flex-Power-Modules BMR4913206-855 DC-DC converter

MPN: BMR4913206-855

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules BMR4913206-855 is a DC-DC converter from the BMR491 (1300W) series. The specified input voltage range is 45V to 60V. The output voltage is 10.4V. The listed power rating is 1.3 kW. The maximum output current is listed as 125A. The listed efficiency is 97.3%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 115°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.30" L x 1.45" W x 0.55" H (58.4mm x 36.8mm x 14.0mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Heat Sink, I²C Interface, PMBus™, Remote On/Off, Standby Output; Control Features: Enable, Active Low; Approval Agency: cURus, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencycURus, UL
Control FeaturesEnable, Active Low
Current - Output (Max)125 A
Efficiency97.3 %
FeaturesAdjustable Output, Baseplate, Heat Sink, I²C Interface, PMBus™, Remote On/Off, Standby Output
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)1 (Unlimited)
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 115 °C
PackageTray
Package / CaseQuarter Brick
Power (Watts)1.3 kW
SeriesBMR491 (1300 W)
Size / Dimension2.30" L x 1.45" W x 0.55" H (58.4 mm x 36.8 mm x 14.0 mm)
Standard Number62368-1
TypeIsolated Module
Voltage - Input (Max)60 V
Voltage - Input (Min)45 V
Voltage - Isolation1.5 kV
Voltage - Output 110.4 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.