ABB-Power-Conversion

ABB-Power-Conversion FW250F1 DC-DC converter

MPN: FW250F1

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

ABB-Power-Conversion FW250F1 is a DC-DC converter from the FW250 (165W) series. The specified input voltage range is 36V to 75V. The output voltage is 3.3V. The listed power rating is 165 W. The maximum output current is listed as 50A. The listed efficiency is 79%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 4.60" L x 2.40" W x 0.53" H (116.8mm x 61.0mm x 13.5mm); Package / Case: Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP, SCP; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Control FeaturesEnable, Active High
Current - Output (Max)50 A
Efficiency79 %
FeaturesRemote On/Off, OCP, OTP, OVP, SCP
ManufacturerABB Power Conversion
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 100 °C
PackageBulk
Package / CaseModule
Power (Watts)165 W
SeriesFW250 (165 W)
Size / Dimension4.60" L x 2.40" W x 0.53" H (116.8 mm x 61.0 mm x 13.5 mm)
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation1.5 kV
Voltage - Output 13.3 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.