ABB-Power-Conversion

ABB-Power-Conversion NH020F DC-DC converter

MPN: NH020F

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

ABB-Power-Conversion NH020F is a DC-DC converter from the NH020 (20W) series. The specified input voltage range is 4.5V to 5.5V. The output voltage is 3.3V. The listed power rating is 20 W. The maximum output current is listed as 6A. The listed efficiency is 86%. The operating temperature range is 0°C ~ 115°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.50' L x 0.24' W x 0.55' H (63.5mm x 6.1mm x 14.0mm); Package / Case: 9-SIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Control FeaturesEnable, Active Low
Current - Output (Max)6 A
Efficiency86 %
FeaturesRemote On/Off, OCP, OTP
ManufacturerABB Power Conversion
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature0 °C ~ 115 °C
PackageBulk
Package / Case9-SIP Module
Power (Watts)20 W
SeriesNH020 (20 W)
Size / Dimension2.50' L x 0.24' W x 0.55' H (63.5 mm x 6.1 mm x 14.0 mm)
TypeNon-Isolated PoL Module
Voltage - Input (Max)5.5 V
Voltage - Input (Min)4.5 V
Voltage - Output 13.3 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.