Flex-Power-Modules

Flex-Power-Modules PKU4105CPI DC-DC converter

MPN: PKU4105CPI

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules PKU4105CPI is a DC-DC converter from the PKU 4000C (100W) series. The specified input voltage range is 36V to 75V. The output voltage is 5V. The listed power rating is 100 W. The maximum output current is listed as 20A. The listed efficiency is 93.6%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.30" L x 0.90" W x 0.33" H (33.0mm x 22.9mm x 8.5mm); Package / Case: Sixteenth Brick; Number of Outputs: 1; Features: Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencyCB, CSA, IEC, TUV, UL
Base Product NumberPKU410
Control FeaturesEnable, Active Low
Current - Output (Max)20 A
Efficiency93.6 %
FeaturesRemote On/Off
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 125 °C (With Derating)
PackageTray
Package / CaseSixteenth Brick
Power (Watts)100 W
SeriesPKU 4000C (100 W)
Size / Dimension1.30" L x 0.90" W x 0.33" H (33.0 mm x 22.9 mm x 8.5 mm)
Standard Number62368-1
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation1.5 kV
Voltage - Output 15 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.