Flex-Power-Modules
Flex-Power-Modules PKU4106CPI DC-DC converter
MPN: PKU4106CPI

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Flex-Power-Modules PKU4106CPI is a DC-DC converter from the PKU 4000C (100W) series. The specified input voltage range is 45V to 75V. The output voltage is 5.5V. The listed power rating is 99 W. The maximum output current is listed as 18A. The listed efficiency is 93.7%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.30" L x 0.90" W x 0.33" H (33.0mm x 22.9mm x 8.5mm); Package / Case: Sixteenth Brick; Number of Outputs: 1; Features: Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKU410 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 18 A |
| Efficiency | 93.7 % |
| Features | Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 125 °C (With Derating) |
| Package | Tray |
| Package / Case | Sixteenth Brick |
| Power (Watts) | 99 W |
| Series | PKU 4000C (100 W) |
| Size / Dimension | 1.30" L x 0.90" W x 0.33" H (33.0 mm x 22.9 mm x 8.5 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 45 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 5.5 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.