Flex-Power-Modules

Flex-Power-Modules BMR4920300-864 DC-DC converter

MPN: BMR4920300-864

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules BMR4920300-864 is a DC-DC converter from the BMR492 (600W) series. The specified input voltage range is 40V to 60V. The output voltage is 9.5 ~ 12V. The listed power rating is 1.104 kW. The maximum output current is listed as 92A. The listed efficiency is 97.3%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 60950-1; 62368-1; Size / Dimension: 2.30" L x 0.89" W x 0.50" H (58.4mm x 22.7mm x 12.7mm); Package / Case: Eighth Brick; Number of Outputs: 1; Features: Baseplate, Heat Sink, I²C Interface, PMBus™, Remote On/Off, Standby Output; Control Features: Enable, Active Low; Approval Agency: cURus, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencycURus, UL
Control FeaturesEnable, Active Low
Current - Output (Max)92 A
Efficiency97.3 %
FeaturesBaseplate, Heat Sink, I²C Interface, PMBus™, Remote On/Off, Standby Output
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)1 (Unlimited)
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 125 °C (With Derating)
PackageTray
Package / CaseEighth Brick
Power (Watts)1.104 kW
SeriesBMR492 (600 W)
Size / Dimension2.30" L x 0.89" W x 0.50" H (58.4 mm x 22.7 mm x 12.7 mm)
Standard Number60950-1; 62368-1
TypeIsolated Module
Voltage - Input (Max)60 V
Voltage - Input (Min)40 V
Voltage - Isolation1.5 kV
Voltage - Output 19.5 ~ 12 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.